2011 Mazak Quickturn Nexus 250-II MY

Lot 2 - 2011 Mazak Quickturn Nexus 250-II MY

Description:

2011 Mazak Quickturn Nexus 250-II MY

S/n: 223325
Date: 2011
Weight: 6800kg
L x W x H: 4382 x 1870 x 2095mm
Weight: 6800kg
Date: 2011
Bed Size: 1500mm
CAPACITY Chuck size main spindle - 10 "
Maximum swing - 675 mm
Maximum machining diameter - 380 mm
Bar work capacity main spindle - (dependant on chuck system) 76 mm
MAIN SPINDLE Rotating speed maximum - 4,000 rpm, Mininmum - 35 rpm
Chuckwork 400 kgf
Shaftwork 700 kgf
Spindlebore 91mm
Spindle centre line 1020mm
Spindle nose A2-8
Motor output (30 minute rating) - 26.0 kW
TURRET Number of tools - 12 in VDI turret
Turret tool shank 25mm
Indexing Full: 0.6 seconds Single: 0.2 seconds
Mill spindle motor output (10 minute rating) - 5.5 kW
FEED AXES Travel (X axis) - 230 mm
Travel (Y axis) - 100 mm
Travel (Z axis) - 1,595 mm
Rapid Traverse
X axis max 30m/min
Y axis max 21m/min
Z axis max 33m/min

STANDARD MACHINE EQUIPMENT

Please note that this machine will be fitted with a Relocation Detector, designed to help halt the spread of weapons of mass destruction. In the event that the machine is moved from the place where it was originally installed a password will need to be entered by an authorised Mazak representative in order to use the machine in automatic mode.

***If exporting outside of the UK an Exportation Licence will be required for this Machine***

Power transformer for European market
12.1 colour LCD
One set of manuals
Foundation kit (plates)
Mazak standard colour (Black/Grey)
C axis 0.0001º increments (1st spindle)
12 position drum turret
Tailstock (dead centre type)
Tailstock thrust select
Live centre (NSK/LC-5SW)
Y axis control
Operator door interlock with lock switch
Double foot switch
Hydraulic pressure interlock
Full coverage chip and coolant guard
Work light
High power coolant (520W)
Complete coolant system
Chuck open/close confirmation
10” through hole chuck B210A815D/S1877-15Y (bar capacity 76 mm)
Tool eye (automatic)
Preparation for chip conveyor (side)
Milling spindle synchronous tapping
User macro (600 variables)
Mazak tapping/boring tornado (EIA)
EIA/ISO code input function
Sequence number comparison stop function
Background tool path check
Threading function
Polar coordinates input (G122)
Direct entry of drawing dimensions
USB interface (2 port)
LAN port
Intelligent thermal shield
Intelligent safety shield
Mazak voice adviser
Virtual machining

SWARF MANAGEMENT SYSTEMS
Chip conveyor - side discharge (hinge)
*Comes with programmable tailstock

Location: Aberdeen

* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.

* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.

Recommended Transport