Lot 2 - BIGLIA B658 YS Machining Centre 5 Axis CNC Lathe (2006)
Description:
BIGLIA Machining Centre: B658 YS (2006) S/n 9379
Control: Fanuc 18i-TB
Iemca KID70 Barfeed (2007)
Driven and Standard Tooling package included
Driven and Standard Tooling package included
Machining Capacity
Max. swing over guideways 620 mm
Max. turning dia. 320 mm
Max. bar capacity 80 mm
Max. machining length 650 mm
Hole of drawtube 82 mm
Spindle Drive
Max. spindle speed 3200 rpm
Spindle nose 8 ASA
Spindle bore 90 mm
Inside dia. of spindle bearing 130 mm
Motor power 22-30 kW
Torque 725 Nm
Constant power starting at 390 rpm
Cylinder thrust area for chucking 212 sq cm
Cylinder stroke for chuck actuation 35 mm max
Adjustable chucking thrust from 5 to 30 Bar 6360 daN max
Max. chuck dia. 315 mm
Tool Holding System
Turret type 12 position
Turret Indexing 0.1 sec
Tool dimensions 25 x 25 mm
Boring bar dimensions 32 & 40 mm dia.
Power Tooling
No. of power tools 12
Spindle indexing C-axis & disc brake
Drilling 14mm for steel & cast-iron
20 mm for aluminium
Tapping M12 max
Motor power 5.5/3.7 kW
Constant power starting at 750 rpm
Max. spindle speed 4000 rpm
Min. programmable value 0.001 º
Max. rapid traverse 80 rpm
Sub spindle Drive
Max. spindle speed 5000 rpm
Spindle nose 140 mm
Spindle bore 50 mm
Max bar capacity 38 mm
Motor power 7.5-11 kW
Constant power starting at 1500 rpm
Cylinder stroke 22mm
Cylinder thrust area for chucking 109 sq cm
Adjustable chucking thrust from 5 to 30 Bar 3830 daN max
Spindle rotation speed & positioning synchronised
Max. chuck dia. 165 mm
Ejector stroke 98 mm
Slide Assembly
Longitudinal slide Z-axis
Max. stroke 650 mm
Ballscrew dia. 40 mm
Max. rapid traverse 24 m/min
Transversal slide X axis
Max. stroke 220 mm
Ballscrew dia. 32 mm
Max. rapid traverse 20 m/min
Transversal slide Y-axis
Max. stroke 110 mm (+60 -50)
Stroke on sub-spindle
Ballscrew dia. 32 mm
Max. rapid traverse 6 m/min
Longitudinal slide B-axis
Max. travel 650 mm
Ballscrew dia. 40 mm
Max. rapid traverse 24 m/min
Max. thrust 510 kg
Accuracy
X and Z-axis repeatability ± 0.001 mm
X and Z-axis positioning ± 0.0015 mm
Hydraulic System
Control unit capacity 45 litres
Drive motor rating 1.5 kW
Max. pressure 40 Bar
Coolant System
Tank capacity 250 litres
Electropump rating 0.75 kW
Pump nominal displacement 150 l/min
Max. pressure 3 Bar
Lubrication System
Tank capacity 3 litres
Overall Power 38 kW
Weight and Overall Dimensions
Machine total net weight 6200 kg
Machine with swarf conveyor 4000 x 1800 x 2000h mm
Standard Equipment
FANUC 18i-T Control System 10.4 inch colour LCD
C axis with disc brake on sub spindle
Coolant system 4.5 Bar
Parts catcher for components up to 160 mm long
RS 232C interface with memory card slot
Barfeed interface
End of cycle lamp two colour
Work light
Swarf conveyor
Totally enclosed guarding with interlock
Set of instruction manuals
Tool kit
Specified Optional Equipment Included
Kitagawa BB210 A8 10" Big bore 3-Jaw chuck,
Kitagawa QCRS80 collet chuck Main-spindle
Kitagawa B206 A8 6" 3-Jaw chuck, with
cylinder adaptor, drawtube and soft/hard jaws Sub-spindle
Electronic tool-probing system
Operator History Function
Anti-collision software
Tool load monitoring (S.B.S)
Additional high pressure coolant pump 18 Bar
with filters for high and low pressure
Fume extraction unit including fittings
Parts catcher for bar machined parts
(max length of component 150 mm, max 80 mm dia)
Please note: Chip Bucket Not included
Location: Burnley, UK
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Bid information
Time remaining
HRSMINSEC
000000
10 Apr 2014 15:10:00 BST