Description:
Binns & Berry TB707 x 126 Gap Bed Centre Lathe
Model TB707 x 126”
Serial number 20029
Year 1970
Distance between centres 126” 3200 mm
Swing over bed 27” 707 mm
Swing over saddle 19.5” 482 mm
Swing over cross-slide 17” 420 mm
Swing in gap 46” 1168 mm
Width of double gap in front of faceplate 18” 450 mm
Hole through spindle 4.125” 104 mm
Spindle speeds (16) 21.3 – 1078 rpm
Main motor 20 HP 15 kW
Longitudinal feeds per rev (70) 0.001 - 0.100 “ 0.026 – 2.54 mm
Cross feeds (70) 0.0005 – 0.050 “ 0.013-1.27 mm
Threads per inch (80) ½ - 112 tpi
Circular pitches (53) 1/32 - 3.5 “
Metric pitches (53) 0.5 - 56 mm
Height of centres 13.75”
Bed width 20”
Spindle nose 10”
Taper of tailstock centre No. 5 Morse
Weight (approx.) 6.5 Tons
Machine complete with :-
Double gap
Rapid power traverse
21” Pratt 3 jaw chuck
24” Pratt 4 jaw chuck
45” Faceplate with adjustable jaws
Catchplate
10” 3 point steady
Travelling steady
Square 4 way toolpost
Dual dials
Coolant
Chuck lifting bracket
Location: Solihull
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Time remaining
08 Sep 2016 15:00:00 BST