Description:
Fanuc Control
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Specifications:
The specifications given are to the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.
Swing Over Bed - 510mm
Max Turned Dia - 260mm
X Axis Travel - 170mm
Z Axis Travel [Turned Length] - 540mm
A Axis Travel - 625mm
Y Axis Travel - 80mm
Carriage Inclination [Slant Bed] - 60
Spindle Centre Height [From Floor] - 277mm
Spindle Nose - A2-6
Chuck Size - 210/254mm
Spindle Bore - 77.5mm
Drawtube [Bar] Capacity -65mm
Spindle Bearing [Internal Diameter] - 110mm
Spindle Speed [max] rpm -5000rpm
Spindle Motor Power - 22kw
"C" Axis Resolution - 0.001
X Axis Ballscrew [Diameter & Pitch] - 32 x 8mm
X Axis Rapid Traverse - 25m/min
X Axis Thrust - 5.73kN
Z Axis Ballscrew [Diameter & Pitch] - 40 x 10mm
Z Axis Rapid Traverse - 30m/min
Z Axis Thrust - 7.15kN
A Axis Ballscrew [Diameter & Pitch] - 32 x 10mm
A Axis Rapid Traverse - 30m/min
A Axis Thrust -4.77kN
Y Axis Ballscrew [Diameter & Pitch] -32 x 5mm
Y Axis Rapid Traverse - 10m/min
Y Axis Thrust -5.00kN
Operation [Hydraulic Clamp/Servo Index] - Bi-directional
Disk Diameter [* = Across Flats] - 270
Tooling Type - VDI30
Number of Tool Stations - 12
Turning Tool Shank Size - 20 x 20mm
Maximum Boring Bar - 32mm
Travel Past Centre Line - 22mm
Number of Driven Tool Station - 12
Maximum Collet Size - 16mm
Maximum Speed - 5000rpm
Maximum Power - 3.7kw
Rotating Tool Coupling - DIN 5480
(16 x 0/8)
Width Across Cross Guide Ways - 240mm
Min/Max Travel [Jaw to Jaw] - 0/600mm
Spindle Nose - DIN 6353 [110]
Chuck Size - 170/43mm Bore
Spindle Bore - 55mm
Draw Tube Diameter [x Length] - 40 x 370mm
Spindle Speed [max] - 6000rpm
Spindle Power - 7.5kw
Spindle Torque - 47.7Nm
B Axis Resolution - 0.001
Maximum Power Consumption - 50kVA