Doosan DNM5700S CNC Vertical Machining Centre (2018)

Lot 1 - Doosan DNM5700S CNC Vertical Machining Centre (2018)

Description:

Doosan D M 5700S Vertical Machining Centre equipped with Siemens 828D CNC Control System with ShopMill programming Axis stroke

X Axis (Table) - 1050mm
Y Axis (saddle) - 570mm
Z Axis (spindle head) - 510mm
Spindle nose to table top - 150 to 660mm
Spindle centre to column guideway - 587mm

Table
Table size - 1300 × 570 mm
Table surface (T slot) - 4 x 18H8 wide / 125mm pitch
Maximum loadon table - 1000kg

Spindle (BIG Plus type)
Speed range - 120t o 12,000 p m max
Spindle taper - BT 40
Pullstud - Nikken PS-806

Axis traverse rates
Rapid traverse (X, Y) - 36000mm/min
Rapid traverse (Z) - 30000mm/min
Maximum feedrate - 15000mm/min
Feedback system - Absolute encoder

Motor Sizes

Spindle motor (direct coupled type)- AC 11/18.5kW
Maximum spindle torque - 141Nm
Axis motor (X) - AC 2.73kW
Axis motor (Y) - AC 3.25kW
Axis motor (Z with brake) - AC 2.62KW

Tool shank type - BT40
Max tool length - 300mm
Max tool weight - 8Kg
Max tool diameter (any pocket) - 80mm dia
Max tool diameter (adj pockets vacant)

Tool selection - Random
Magazine capacity (standard)- 30 Tools
Tool change time (tool to tool) - 1.2 sec
Tool change time (chip to chip) - 3.2 sec

Machine services
Power requirements - 30.0KVa
Air pressure - 5.5kgf/cm2

Machine dimensions
Machine weight - 6500kg

Machine floor space -2,413mm x3, 110mm

Machine Height - 2.985mm

Siemens 828D CNC Specification
15" touch screen
DXF Reader
Shop Mill operator programming system 3D CNC simulation for milling
Highest machining precision with 80bit NANO Accuracy CNC user memory up to 6.6MB
Additional CNC user memoryon USB memory stick Minimum block cycle time: ~ 1ms
Acceleration with jerk limitation, dynamic precontrol
Dynamic feed forward control
Number of look ahead blocks: 150 Automatic CNC-block compression Path control: Advanced Surface
Linear, circular and helix interpolation
Up to 3 axes simultaneous interpolation (X, Y, Z. rotary axis) Constant path velocity referenced to tool centre point or tool edge Rigid tapping and thread milling
Spindle orientation
Inch/metric conversion
Number of settable offsets: 100
Synchronized actions and high-speed auxiliary function output

* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.

* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.

Recommended Transport