Hurco VM 20i Machining Centre (2014)

Lot 1 - Hurco VM 20i Machining Centre (2014)

Description:

Comes with a selection of tooling and a 4th axis.

NO manuals as all manuals are online.

TRAVELS & CAPACITY

X, Y, Z Axis Travel 40 x 20 x 20 in (1016 x 508 x 508 mm)
Table Size 46 x 20 in (1168 x 508 mm)
Max. Weight on Table 3970 lbs (1800 kg)
Spindle Nose to Table Min/Max 4.0 / 24 in (102 / 610 mm)
T-Slot Size 5 x .71 in (5 x 18 mm)

SPINDLE

Max. Spindle Speed 12000 rpm
Spindle Power (peak - 1 min) 20 hp (15.0 kW)
Spindle Torque (peak - 1 min) 75 ft-lbs @ 1450rpm (102 Nm @ 1450 rpm)

TOOL CHANGER

Tool Type CAT 40 / Big Plus® (CAT/BT 40)
Number Of Tools 24
Max Tool Diameter 3.1 in (80 mm)
Max Tool Length 9.8 in (250 mm)
Max Tool Weight 15.4 lb. (7 kg)

FEEDRATES

Rapid Traverse X,Y,Z Axis 1102 in/min (28 m/minute)
Max Programmable Feedrate 1102 inches/minute (25.5 m/minute)

* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.

* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.

Recommended Transport