XYZ Proturn 350 Gap Bed Centre Lathe (1999)

Lot 18 - XYZ Proturn 350 Gap Bed Centre Lathe (1999)

Description:

Height of centres - 235mm, Distance between centres - 1250mm, Swing over bed - 470mm, Swing over cross-slide - 290mm, Spindle bored to pass - 60 -80mm, Spindle nose - Camlock D 1-8", Taper in Nose bush - No.5MT, Spindle Speeds - 3 variable ranges, Low range - 15-300RPM, Med range - 50-850RPM, High range - 140-2500RPM, Main motor - 7.5kW, Servo motors (cross & longitudinal axis) - 6/2000, Cross (x) axis ball screw diameter & pitch - 25 x 5mm, Longitudinal (z) axis ball screw diameter & pitch - 40 x 5mm, Rapid power traverse rate (cross axis) - 5m/min, Rapid power traverse rate (longitudinal axis) - 5m/min, Width over bedways - 330mm, Width of cross slide - 180mm, Cross slide travel - 200mm, Tailstock quill diameter - 75mm, Tailstock quill travel - 150mm, Tailstock quill taper - No.5MT

Export Information

Please note: If you are successful in purchasing an item and wish to export it from the UK, a charge of £75.00 will be automatically added to your invoice to cover preparation of the goods and completion of the required UK export customs declarations. This process has been a mandatory UK export requirement since 1 January 2021.

All invoices are issued on an Incoterms FCA basis.

Exports outside the EU may require an export licence. Where applicable, a further charge of £250.00 will be automatically added to your invoice. Please also note that, while an export licence is being processed, the purchaser is responsible for placing into storage until the licence is issued.

* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.

Recommended Transport